Production:

Hire Catalogue

Call us:
020 8961 2749
Venue:
183a Park Ave,
Park Royal,
London,
NW10 7XH
Contents:

ColorSource Spot & Fresnel

An LED luminaire crafted by lighting experts,

ColorSource Spot uses a balanced recipe of red, green, blue, a twist of lime, and an extra dash of red to provide a richness of color only possible from ETC LED luminaires. ColorSource Spot outputs bright, beautiful light, is easy to use with or without a lighting desk, and lives up to ETC's high standards for quality.

ColorSource luminaires are factory-calibrated to ensure consistency. Their four-color mixing system offers bright, vibrant colors, and perfectly-mixed pastels.

The thermal management algorithms built into every ColorSource fixture ensure that the colors you choose in rehearsal are the colors you get during the show.

MANUFACTURER DETAILS: ColorSource Spot & Fresnel
Specification

SOURCE
60 Lumileds LUXEON® Rebel LED
6,932 Max lumens
42.4 Lumens per watt
L70 rating (hours to 70% output): 54,000 hours (both variants)*

COLOR
Spot: Red, green, blue, limeSpot DB: Red, green, indigo, lime
Color mixing
Calibrated array
No red shift

OPTICAL
Swappable lens tubes between 5-90 degrees
79-24 mm Gate size
6.25”-14” (depending on lens tube) aperture size
Pattern projection
A or B Pattern size
1,200 Hz (default) and 25,000 Hz (via RDM)
Can be used with Source Four LED CYC and Fresnel adapters

ELECTRICAL
100-240 VAC 50/60 Hz
powerCON power in and thru
28 A at 120 V (First half-cycle)
46 A at 240 V (First half-cycle)
9 fixtures (15 A power thru connector) or 10 fixtures (R20 module or similar)
147 W / 1.87 W at 120 V
1.24 A at 120 V

THERMAL
Ambient operating temp: 0°–40° C (32°–104° F)
Fan (controllable)
Droop compensation
21.2 dBa average at 1 m
504.78 BTUs/hour

CONTROLS
DMX512 via 5-pin XLR orRJ45 connectors Input method
DMX512/RDM
4 modes for footprint
RDM configuration
UI type: Seven-segment, three-button interface
Local control
12 Onboard presets
5 Onboard sequences
No onboard effects
Fixture-to-fixture control
15-bit virtual dimming engine

*Note about LED luminaire lifetime:
ETC utilizes a nationally recognized third-party lab for luminaire testing according to IES LM-84.