Production:

Hire Catalogue

Call us:
020 8961 2749
Venue:
183a Park Ave,
Park Royal,
London,
NW10 7XH
Contents:

Sceptron and Powerports

Linear LED video batten with 10mm pixel pitch

The VDO Sceptron 10 is a linear outdoor-rated LED video fixture for the rental market with 10 mm pixel pitch and an extensive range of optical accessories for a wide variety of looks. The VDO Sceptron 10 is driven by the Martin P3 System Controller family for easy configuration, mapping and setup, and is also backwards compatible with DMX for smaller setups. The integrated power and data cabling allows for long daisy-chains with many fixtures per cable-run, while the power supply can be located backstage (up to 50 m away) for a clean setup avoiding messy cabling and several driver boxes. 

Extensive range of field-exchangeable optical accessories for a wide variety of looks
Easy setup, mapping and configuration
Bright and fully calibrated for optimal consistency
Complete range of rigging accessories available


MANUFACTURER DETAILS: Sceptron and Powerports
Specification

PHYSICAL
Length: Available in 320 mm (12.6 in.) and 1000 mm (39.4 in.) versions
Width: 27 mm (1.07 in.)
Height: 28 mm (1.10 in.)
Weight: 1.2 kg / m (0.81 lbs. per foot)

CONTROL AND PROGRAMMING
Control options: Martin P3™ System Controller via Martin P3™ PowerPort 1500 / Martin P3™ PowerPort 1000 IP, and/or DMX
Control modes: RGB, basic, segment and pixel-level
Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
Protocol detection: Automatic
Setting and addressing: P3 System Controller or RDM-compliant controller
DMX channels: 3/10/13/22/103/307
Color and intensity calibration: Pixel-level
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Firmware update: Via Martin P3™ System Controller

CONTROL/USER INTERFACE
Device status: Multi-color visual indication
Device test and reset: Magnetic pushbutton to call up local test patterns and reset device

OPTICS
Options:
Open Front
Flat Diffuser
Flat Smoked Diffuser
Round Diffuser
Round Smoked Diffuser
Square Diffuser (supplied as standard with fixture)
Square Smoked Diffuser
Tube Diffuser
Tube Smoked Diffuser
NoBlend Diffuser
Smoked NoBlend Diffuser
Asymmetric (Wall-Washing) Lens
All options can be interchanged at any time.

Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
*Figure obtained under manufacturer’s test conditions.

PHOTOMETRIC DATA
Color resolution: 16 bits per color (48 bits per pixel)
Pixels: 100 per meter
Pitch (pixel center-to-center): 10.00 mm
Luminous intensity, calibrated mode: 250 cd per meter*
Viewing angle: 120° x 120°
Total output, calibrated mode: 8,333 nits (modules spaced 30 mm center-to-center)*, 750 lumens per meter*
*Preliminary data, figures are approximate.

VIDEO PROCESSING
Brightness control
Gamma correction and control
Color temperature control
Color space control
Calibration processing
Synchronization

SIGNAL PROTOCOL
Martin P3 (via Martin P3™ PowerPort) or DMX

CONSTRUCTION
Color: Matte black
Base: Extruded aluminum profile
Protection rating: IP65
RoHS compliant

INSTALLATION
Mounting: Slot for locking nuts on back of profile (M6) and optional sliding bracket for M12 bolt
Mounting options: Flat surface at any angle, pedestal or other suitable support
Orientation: Any

CONNECTIONS
Power and data input: 6-pin custom (BBD) IP66-rated
Power and data thru: 6-pin custom (BBD) IP66-rated
Hot plugging compatible

ELECTRICAL
Nominal input voltage: 48 VDC +/- 4%
Power supply options: Martin P3™ PowerPort 1500, P3™ PowerPort 1000 IP, Tripix™ Power or generic 48 VDC PSU
Total power consumption (at maximum intensity, full white): 33 W per meter

THERMAL
Cooling: Convection
Maximum ambient temperature (Ta max.): 55° C (131° F)
Minimum ambient temperature (Ta min.): -30° C (-22° F)
Total heat dissipation (calculated, +/- 10%): 115 BTU/hr per meter

APPROVALS
EU safety: EN 60950-1, EN 60950-22, EN 62471
EU EMC: EN 55032, EN 55024
US safety: UL 60950-1, UL 60950-22
US EMC: FCC Part 15 Class A
Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
Canadian EMC: ICES-003 Class A
Australia/NZ: RCM